INTELLIREAM
®
MP
pg.
25
8. Parts Replacement
8.1.
Reaming Bit Replacement
• Disconnect air and electrical supply.
• Hold the ream rod,
item 1
, from rotating with one of
two 5/8” wrenches,
item 2
, under the
washer,
item 3
.
• Unfasten the reaming bit,
item 4
, with a second
5/8” wrench.
• Remove the reaming bit,
item 4
.
• Insert the new reaming bit through the flat washer,
item 3
.
• Insert the reaming bit into the ream rod.
• Hold the reaming rod from rotating with a 5/8”
wrench under the washer.
• Tighten the reaming bit with a second 5/8” wrench.
• Reconnect air and electrical supply.
8.2.
Spray Nozzle Replacement
• Disconnect air and electrical supply.
• Unscrew spray nozzle,
item 1
, by hand.
• Insert new spray nozzle.
TIGHTEN BY HAND ONLY.
• Reconnect air and electrical supply.
2
1
4
3
1
