Rev 8, Dated 27-2-2018
64
5)
Removing DC Motor from Treadmill:-
a) First elevate treadmill to its middle position with aid of actuator.
b) Remove DC motor connection from High frequency drive.
Warning: -
Do not disturb two bolt of DC motor adjuster (M10X30mm hex bolt).
c) Remove DC motor fly wheel retainer plate by removing M12 hex bolt as shown
in fig 23.
Fig23
d) After removing fly wheel retainer plate remove timer belt which is attached to the
plate.
e) Now remove four M10X40 hex bolt plus plain spring by removing M10 nut attached
with it as shown in fig.24 and then DC motor can be easily removed from treadmill.
Fig.24
Fly wheel
retainer
plate
M10X40 hex
bolt+M10 nut
