Rev 8, Dated 27-2-2018
52
Treadmill through test
Treadmill option.
If
still
problem
persists, isolate the
Treadmill from
PC and test the same
Independently for
elevation (Refer
STWin service manual
Procedure 1, page-
26**)
4
No medians
and no
heart rate.
Check If amplitude of
R wave is not less
than 0.4cm in QRS
detection lead.
If it is less than 0.4
cm then Change the
QRS detection leads
from menu option so
that the Q detection
lead is with tall R
wave.
Amplify
the
QRS
detection lead.
Increase the gain
After doing any one of above three options,
wait till the heart rate settles to correct value.
Once the heart rate settles, click relearn
buttons 3 to 4 times so that the medians get
updated correctly.