NARGESA MT150, Instruction Book

Page: 7 / 45

TWISTING MACHINE MT150 A INSTRUCTIONS BOOK 6
1.8. Description of accessories
The basic accessories the machine has, are the coupling for the head of the different shapes.It is provided
with different stand parts, stand point and clamping of materials. In the last part of the manual there is a
series of operations which are explained step by step by means of pictures.
1.9. Description of safety devices
Gear and moveable parts are covered with the exception of the rotary head.
1.10. Basic characteristics of the tooling that can be adjusted to the machine
In case of getting accessories fitted to the machine it is necessary to bear in mind that they need to have
the same clamping so that they can not loose or be sent off.
1.11. Information related to the electrical equipment
The MT150A twisting machine, is equipped with a three-phased motor 230V / 400V 0,37Kw, and an electric
set to be able to be connected to a single phased 230V.
The machine can be connected to two different power:
1. A single-phase 230V connection is 230V phase + neutral
2. A two-phase 230V connection is two phases ie 115V
Conversion will not be possible to connect the machine to a three-phase network as long as the installation
of the machine is not replaced by a three-phase network installation.
IMPORTANT
This must be connected to a power supply with ground wire.
Engine Power 0,37 KW / 0,5 HP
2 phased tension 230 V Single phased
Rotary speed Adjustable 0 to 9 r.p.m.
Twisting máximum capacity 20 mm or 3/4”
Bending máximum capacity 16 mm or 5/8”
Max. Scrolling and bending in flat bar 35x10 mm o 1 1/4”x3/8”
Máx. continued scrolling length 960 mm
Dimensions 2260x630x1120 mm
Weight 260 Kg