NARGESA MT150, Instruction Book

Page: 19 / 45

TWISTING MACHINE MT150 A INSTRUCTIONS BOOK 18
6.4.8. Programing the torsion of one piece
The user presses the button for “Programming”.
Picture 8. starting screen to define onetorsion
6.4.8.1. Finding the starting point
The user I can either press te button for “Left Turning”
Picture 9. Screen for left turning
Or press the button for “Right turning”
Picture 10. Screen for right turning
Until it reaches the point he thinks is the proper one to start twisteing the piece.
Picture 11. Starting screen for defining one torsion
6.4.8.2. Confirm the starting point of the torsion
The user presses the button for “Programming”
Picture 12. Screen to define the kind of torsion
DEFINE STARTING
POINT OF THE TORSION
RIGHT TURNING
DIRECTION
RIGHT TURNING
DIRECTION
DEFINE STARTING
POINT OF THE TORSION
DEFINE TORSION
POINT