NARGESA MT150, Instruction Book

Page: 27 / 45

TWISTING MACHINE MT150 A INSTRUCTIONS BOOK 26
After some intermittencies, the machine shows on screen the following message.
Picture 42. Screen to indicate the machine awaits confirmation to initialize.
The user should press the “Escape” button
Figura 43. Pantalla de inicialización.
Now the machine turns until it finds it starting point.In this moment the machine stops and goes to StandBy.
Picture 44. Screen for StandBy on default
6.6. Selection of language and model
This section is the most complicated of the control, bacause in case a mistake occurs when programming It
could cause irreparable damage to the machine and the control.
So considering this, the user should obey and follow all steps described below:.
Here the user will find the different screens presented at eache moment in a detailed way in order to ease
the understanding of the functioning of this machine.
By pressing the key “Left Turning Key” it will be possible to acceed this menu while the machine is being
electrically supplied by the general switch. Once this has been carried out there comes the following infor-
mation on screen.
Picture 45. Screen for selecting the language
ESCAPE TO
INITIALIZE
NARGESA MT150A
INITIALIZING
NARGESA MT150A
IN STANDBY
SELECTION OF LANGUAGE
SPANISH