NARGESA MT150, Instruction Book

Page: 26 / 45

TWISTING MACHINE MT150 A INSTRUCTIONS BOOK 25
6.5.2.2. When there was no torsion in process or any anomalous situation occurs
When the electrical supply is restored the machine shows the following label on the screen.
Picture 38. Screen to indicate there is a piece in the machine.
The user should take out the piece from the machine for his own safety. In order to do that and just in case,
he can help himself from the movement the machine doesif the buttons for “Left turning” and “Right turning”
are pressed.
Once this has been done, the user should press the “Escape” button
Picture 39. Screen to initialize the machine.
Now the machine turns until it reachesits atsrting point, from which all references for the torsion. The machi-
ne stops at this moment and enters in StandBy.
Picture 40. Screen for StandBy on default.
6.5.3. Loss of reference
Although it is not usual that a situation like this occurs, it maight happen thatthe machine looses reference.
In case it happens the machine will show the following label in order to avoid the other pieces from being
manufactured under wrong references.
Picture 41. Screen indicating the loss of reference.
WARNING!!
PIECE INSIDE
NARGESA MT150A
INITIALIZING
NARGESA MT150A
IN STANDBY
POSITIONING MISTAKE