English
1
Technical data
Voltage.
.
0.V
Frequency.
.
50-60.Hz
Input.power.
.
900.W
No-load.speed.
.
0-70.min-1
Speed.under.load.
.
0-615.min-1
Electronic.speed.control.
.
Right/Left.rotation.
.
No-load.impact.rate.
.
.800.min-1
Impact.energy.
.
4,8.J
Tool.holder.
.
SDS-Plus
Drilling.–.ø.max.
.
Full.drill:.
Steel.
16.mm
.
.
Aluminium.
0.mm
.
.
Wood.
40.mm
.
.
Concrete.
.mm
.
Crown.drill:.
Brickwork.
90.mm
Screw.screws-.ø.max.
.
.
Wood.
10.mm
.
.
Plate.
8.mm
Weight.
.
4,8.kg
Protection.class.
.
II./
Control elements
1............Chuck.head
2............Protective.cover
3............Locking.sleeve
4............Locking.sleeve.of.chuck
5............Ventilating.apertures
6............Switch
7............Function.change.over.switch
8............Push.safety
9............Switch.for.change.of.rotating.direction
10..........Additional.handle
11..........Required.chuck
12..........Holding.spindle
13..........SDS-plus.chuck
Noise and vibration information
Values.measured.in.accordance.with.EN.60745-1:2003+A1:2003
Vibrations.(triaxial.measurement)
. Chiseling:.
a
hHCH
.=.16.1.ms
2
. Percussion.drilling:.
a
hHD
.=.16.6.ms
2
. Measurement.accuracy:.
K.=.1.6.ms
2
Noise:
. L
PA
.=.90.dB.(A)
. L
WA
.=.101.dB.(A)
Application
Electro. pneumatic. drilling. hammer. is. a.versatile. power. tool.
intended. for. percussion. drilling,. medium. arduous. chiseling. to.
stone,. concrete. and. wall;. wood,. metal. and. plastic. drilling. and.
screwing.
This.electro.pneumatic.drilling.hammer.is.intended.for.professional.
use.and.may.be.used.only.for.above-mentioned.purposes.
Double insulation
To.ensure.maximum.safety.of.the.user,.our.tools.are.designed.and.
built.to.satisfy.applicable.European.standards.(EN.standards)..Tools.
with.double.insulation.are.marked.by.the.international.symbol.of.
a.double.square..These.tools.must.not.be.grounded.and.a.two-wire.
cable.is.sufficient.to.supply.them.with.power..Tools.are.shielded.in.
accordance.with.EN.55014.
General Safety Rules
WARNING!
Read.all.instructions.
Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
The term "power tool" in all of the warnings listed below refers
to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
SAVE TH ESE INSTRUCTIONS
1) Work area
a)
Keep work area clean and well lit.
Cluttered and dark areas
invite accidents.
b)
Do not operate power tools in explos ive atmospheres,
such as in th e presence of fl ammable liquids, gases or
dust.
Power tools create sparks which may ignite the dust or
fumes.
c)
Keep child ren and bystanders away while operating
a power tool.
Distractions can cause you to lose control
2) Electrical safety
a)
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools.
Unmodified plugs and
matching outlets will reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There
is an increased risk of electric shock if your body is earthed or
grounded.
c)
Do not expose power tools to rain or wet conditions.
Water
entering a power tool will increase the risk of electric shock.
d)
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts.
Damaged or
entangled cords increase the risk of electric shock.
e)
When operating a power tool outdoors, use an extension
cord suitable for outdoor use.
Use of a cord suitable for
outdoor use reduces the risk of electric shock.
3) Personal safety
a)
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
648592 EKK 32 E - CZ+SK+GB.indb 12
13.7.2007 10:11:19
