NARDA FieldMan, User Manual

Page: 65 / 126

8.2 FIELD STRENGTH
Narda FieldMan
65
Using the marker
The measurement results can be evaluated via the marker.
Switch on the marker:
1.
Press
SK3
to stop the display (
HOLD
).
↳
SK1
now shows the marker symbol.
2.
Press
SK1
to show the marker.
↳
A circle shows the marker position in the diagram (
1
), the time and measured
value are indicated on the right above the diagram.
3.
Use the ◄ ► keys to move the marker.
4.
Press
SK1
to turn the marker off again.
If the display was stopped via
HOLD
, the measurement continues in the background.
As soon as the display is restarted, there is therefore continuous recording and
updating of the time curve display.
Using the peak marker
The peak values can be evaluated via the peak marker.
⇒
For information on the peak marker, see 10.7 Peak marker on page 106 .
1