NARDA FieldMan, User Manual

Page: 55 / 126

7.9 SETUPS
Narda FieldMan
55
7.9.5 Creating and managing setups
Open the setup menu:
✓ The desired probe is connected.
✓ To create a new setup, make the desired settings.
⇒
Open
MAIN MENU
>
SETUPS
.
↳
Only the setups created for the currently connected probe type are displayed in al-
phabetical order.
Create a new setup:
⇒
Press
SK4
.
↳
A new setup is created under the default name
Setup [n]
with the current settings.
The digit [n] is incremented up automatically.
Rename a setup:
1.
Highlight a setup with ▲▼, then press
SK2
.
↳
The editor opens.
2.
Edit the setup title:
–
Cross key
: Navigate to the character area and select with the central key.
–
SK1
: Cancel editing
–
SK2
: Switch upper/lower case letters
–
SK3
: Delete character to the left of the cursor
–
SK4
: Accept input and finish
Load a setup:
⇒
Use ▲▼ to highlight a setup and select it with the central key.
↳
The parameters are loaded and the measurement screen is displayed.
Delete a setup:
1.
Use ▲▼ to highlight a setup, then press
SK1
.
2.
Confirm deletion with
SK4
or cancel with
SK1
.
Delete multiple setups:
Setups can only be deleted individually in the device.
⇒
To delete multiple setups, remove the SD card and edit the setup directories exter -
nally.
⇒
Alternatively, format the SD card.
ATTENTION!
This will cause all stored data to be lost.