EN
W415-2341 / A / 11.14.19
13
fi nishing
The insert can be equipped with a fl ashing kit to close off most appliance openings. Mount the fl ashing inside
the unit's outer shell using 4 securing screws. The fl ashing and trim are available in many fi nishes to accent any
room decor. Objects placed in front of the appliance should be kept a minimum of 48" (1219mm) away from
the front face.
TRIM
FLASHING
ON/OFF SWITCH
OPTIONAL ON/OFF
SWITCH LOCATION
LEVELING
SCREW
VARIABLE SPEED SWITCH
GAS KNOB
PIEZO
IGNITOR
FLAME
ADJUSTMENT
KNOB
SECURING SCREWS
SECURING SCREWS
3.6 fl ashing kit
UPPER LOUVRE
LOUVRE CLIP
3.7 fl ush louvre kit, GI-1L (used only with S3600SB)
UPPER LOUVRES
Insert the back edge of the upper louvre into the upper
louvre clips, as shown.
LOWER LOUVRES
Secure the lower louvre assembly to the insert, using
the 4 screws supplied, as shown.
SIDE VIEW
3.8 logo
placement
If desired, the on/off switch can be mounted on the bottom left side of the appliance. See "optional on/off
switch location" above.
note:
Remove the backing of the logo supplied and place, as illustrated.
1/2"(12.7mm)
LOGO
1/2"(12.7mm)
