1
READ SAFETY REQUIREMENTS BEFORE OPERATION
1. The installation must conform with local codes or in the absence of local codes, with either
the National Fuel Gad Code, ANSI Z223.1, or CSA B149.1, Propane Installation Code.
2. This outdoor gas appliance is not intended to be installed in or on recreational vehicles
and/or boats.
3. Maintain proper clearances from combustible construction top 45 CM, sides 60 CM.
4. Inspect the hose before each use of the outdoor gas appliance. If it is evident there is
excessive abrasion or wear, or the hose is cut, it must be replaced prior to this outdoor gas
appliance being put into operation. The replacement hose assembly must be that specified
by the manufacturer.
5. Properly locate the gas hose, keep out of pathways where people
may trip over it or in areas where the hose may be subject to accidental damage.
6. Maintenance Instruction
-
Keep outdoor gas appliance area clear and free from combustible materials, gasoline
and other flammable vapors and liquids.
-
Do not obstruct the flow of combustion and ventilation air.
-
Keep the ventilation opening(s) of the cylinder enclosure free and clear from debris.
-
Cleaning this outdoor gas appliance, including special surfaces, with recommended
cleaning agents, if necessary.
-
Check and clean burner tube to remove any insects and insect nests. Blocked burner
tube can lead to a fire.
7. Maintain adequate clearance around air openings into the combustion chamber, clearances
from combustible material. Air passages to the burner & combustion chamber must be open
and clear.
8. Certain materials or items, when stored under the appliance, will be subjected to radiant
head and could be seriously damaged.
Summary of Contents for PTH55PSS-1
Page 11: ...10 PARTS AVAILABLE TO ORDER ...
