background image

 

 

CAUTION 
 
   

● 

 

Faulty installation, modifications, repairs or maintenance to the appliance may 

            be the cause of injury or damage to property. 

   

●    Carefully read this User Guide before assembling and setting up the heater. 

   

●    Keep this guide for future reference. 
●    DO NOT operate the heater in an explosive environment. Keep this appliance   

away from areas where are gas, or other flammable liquids are stored. 

   

●    Before use, verify that no parts are damaged, inspect gas hose. 

   

●    Never modify this appliance in anyway,. 

   

●    Never use the heater without the reflector. 

   

●    Minimum clearance from combustibles are seen in figure 12 must be adhered to. 

   

●    Always place heater on a leveled, stable and hard surface. 

   

●    Only use this heater outdoors. 

   

●    Never clean with abrasive, corrosive or flammable cleaners. 

   

●    Do not paint the heater or some of its parts. 

   

●    When fully assembled proceed to a leak test. 

   

●    A leak test must be performed before operating the appliance. 

   

●    NEVER LEAK TEST with an open flame or while smoking. 

   

●    The gas cylinder must be closed at all times when not using the heater. 

   

●    Children and adults should be made aware of hot surfaces on the heater. 

   

●    Clothing and other accessories or object are not to be hung on the heater, 

            laid on or near it to dry. 

   

●    Do not obstruct the ventilation opening (hand hole) on cylinder cover. 

   

●    Installation, maintenance and repair of this heater should always be performed 

          by a qualified gas technician. 

 

PARTS LIST                                                 

 

   

      1    Base 

Cylinder cover 

Ventilation opening 

Post 

Ignitor 

Gas control 

Burner assembly 

Flame screen 

Reflector 

                                                                                         

Summary of Contents for PTH55PSS-1













Reviews: