G.
Alignez les 2 trous du dessous de la
bûche croisé avant gauche (G) sur les
2 goujons situés à gauche du brûleur.
Assurez-vous de rester la bûche croisé
avant gauche (G) sur la bûche avant
gauche (F).
H.
Alignez les 2 trous du dessous de la
bûche centrale droit centrale (H) sur les
2 goujons situés à droite du brûleur. Des
ajustements peuvent être nécessaires
pour assurer un placement correct.
E.
Alignez les 2 encoches en dessous de la
bûche avant droite (E) sur les quatrième
et cinquième barreaux du chenet, en
assurant que la bûche avant droit (E) est
à plat. Prenez soin de ne pas couvrir les
orifices.
F.
Alignez l’encoche dans la bûche avant
gauche (F) sur le premier barreaux du
chenet, en assurant que le bord dentelé
est tourné vers l’avant, puis la pousser
légèrement en arrière. Des ajustements
peuvent être nécessaires pour assurer un
placement correct.
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E.
Line the notches in the bottom of the
front right log with the 4th and 5th grate
F.
Line the notch in the front left log with
the front left corner of the burner.
E
F
PINS
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E.
Line the notches in the bottom of the
front right log with the 4th and 5th grate
F.
Line the notch in the front left log with
the front left corner of the burner.
E
F
PINS
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E.
Line the notches in the bottom of the
front right log with the 4th and 5th grate
F.
Line the notch in the front left log with
the front left corner of the burner.
E
F
PINS
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E.
Line the notches in the bottom of the
front right log with the 4th and 5th grate
F.
Line the notch in the front left log with
the front left corner of the burner.
E
F
PINS
placed on the burner.
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E
F
PINS
A
B
placed on the burner.
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E
F
PINS
G.
Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H.
Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I.
Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J.
Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K.
Place the notch in the front charcoal
log over the second grate post. Make
sure not to cover any ports.
L.
Align the pin in the bottom of the
middle crossover with the hole in the
middle of the middle log resting it on
the front left crossover log.
G
H
I
J
K
L
G.
Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H.
Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I.
Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J.
Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K.
Place the notch in the front charcoal
log over the second grate post. Make
sure not to cover any ports.
L.
Align the pin in the bottom of the
middle crossover with the hole in the
middle of the middle log resting it on
the front left crossover log.
G
H
I
J
K
L
G.
Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H.
Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I.
Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J.
Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K.
Place the notch in the front charcoal
log over the second grate post. Make
sure not to cover any ports.
L.
Align the pin in the bottom of the
middle crossover with the hole in the
middle of the middle log resting it on
G
H
I
J
K
L
G.
Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H.
Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I.
Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J.
Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K.
Place the notch in the front charcoal
log over the second grate post. Make
sure not to cover any ports.
L.
Align the pin in the bottom of the
middle crossover with the hole in the
middle of the middle log resting it on
G
H
I
J
K
L
G.
Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H.
Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I.
Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J.
Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K.
Place the notch in the front charcoal
L.
Align the pin in the bottom of the
G
H
I
J
K
L
G.
Align the 2 holes located in the bottom
of the front left crossover log with the
2 studs on the left hand side of the
burner.
H.
Align the 2 holes in the bottom of the
right middle log with the 2 studs on the
right hand side of the burner.
I.
Place the top right log on the notches
in the bottom rear log and the front
right log pushing back against the rear
panel.
J.
Align the hole and the pin in the right
crossover log with the hole in the top
right log.
K.
Place the notch in the front charcoal
L.
Align the pin in the bottom of the
G
H
I
J
K
L
F
E
G
C
I
Continue sur la prochaine page
W415-2193 / D / 11.08.18
20
FR
installation
