A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E.
Line the notches in the bottom of the
front right log with the 4th and 5th grate
F.
Line the notch in the front left log with
the front left corner of the burner.
E
F
PINS
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E.
Line the notches in the bottom of the
front right log with the 4th and 5th grate
F.
Line the notch in the front left log with
the front left corner of the burner.
E
F
PINS
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E.
Line the notches in the bottom of the
front right log with the 4th and 5th grate
F.
Line the notch in the front left log with
the front left corner of the burner.
E
F
PINS
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E.
Line the notches in the bottom of the
front right log with the 4th and 5th grate
F.
Line the notch in the front left log with
the front left corner of the burner.
E
F
PINS
placed on the burner.
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E
F
PINS
A
B
placed on the burner.
A.
Align the 2 holes in the bottom of the
bottom rear log with the studs located
on the rear log support.
B.
Align the 2 pins in the bottom of the top
rear log with the holes in the top of the
bottom rear log.
C.
Align the 2 holes in the bottom in the
middle log with the studs located on
the front log support.
D.
Align the hole in the rear left log with the
left pin of the top rear log.
A
B
C
D
E
F
PINS
2.5 disposition des bûches
A.
Alignez les 2 encoches du dessous de la
bûche à fond arrière (A) avec les goujons
situés sur le support à bûches arrière.
NOTE:
Assurez-vous que la bûche à fond
arrière (A) est derrière le tube du brûleur.
B.
Alignez les 2 épingles sur le dessus de la
bûche à fond arrière (A) avec les 2 trous du
dessous de la bûche arrière dessus (B).
C.
Alignez les 2 trous du dessous de la
bûche centrale (C) sur les goujons situés
sur le support à bûches avant.
D.
Alignez le 1 trou du dessous de la bûche
arrière gauche (D) avec l’épingle gauche
sur le dessus de la bûche arrière dessus
(B). Assurez-vous de rester la bûche
arrière gauche (D) vers le coin avant
gauche du brûleur. Des ajustements
peuvent être nécessaires pour assurer
un placement correct.
Avant de placer l’ensemble de bûches, assurez-vous de courvrir le câblage sur le côté droit du brûleur avec des
morceaux de charbon de bois. Laissez suffisament de morceaux de charbon de bois poiur remplir aléatoirement
l’avant des bûches. Ne placez pas de morceaux de charbon de bois sur le brûleur.
Continue sur la prochaine page
W415-2193 / D / 11.08.18
19
installation
FR
