LIBRA LIB-P432EX Series Programming Instructions
NAPCO Security Systems
Page 22
B. GEM-DXK3 / GEM-DXRP3 Keypads
To access Direct Address Program
Mode, press RESET (
y
) in the
Easy Menu Mode.
1. Press
w
.
2. Enter the 4 digit Address location
directly using number buttons
(0-9).
3. Enter the 2 digit data directly
using number buttons (0-9).
4. Press
U
to save.
To exit, press RESET (
y
).
Example: Direct Address Programming
Program Zones 6, 7 and 8 as Exit/Entry Follower Zones.
DETERMINE THE DATA ENTRIES
1. Referring to ZONE FEATURES in the Programming Worksheets that follow, Exit/Entry Follower for Zones 6
through 8 are located at address 0916, left digit. With a pencil, circle the data values for Zones 6–8.
2. Add the data values for Zones 6, 7 and 8: 2+4+8=14. From Tables 1 and 2, "14" (E) is entered as press
G4
. The right digit (for Zones 1 through 4, none of which are Exit/Entry Follower Zones) is entered as
a blank (•).
PROGRAM THE DATA ENTRIES
1. Enter the panel's Dealer Security Code, then press
w
.
2. Answer NO ("
X
" or
q
) to all questions until "
ACTIVATE PROGRAM Y/N
" is displayed; then press
NEXT ("
r
" or
p
)
.
NOTE:
If you pass "
ACTIVATE PROGRAM
", scroll backward using
x
.
3. Press
y
to enter the Address Program Mode. Address "
0000
" will display.
4. Press
0916
to access Address 0916.
The data for both digits will display and the cursor will
advance to the data field.
5. Press
G4
to enter an "E" in the left digit and press
0
to enter a blank (•) in the right digit.
6. Press
u
to save. Address 0916 is now programmed with "E •".
7. Enter another 4-digit address to continue programming or press
y
to exit and resume normal keypad operation.
GEM-DXK3
Press here to
Select NEXT/
PRIOR address
Flashing
ZONE OPTION
ZONES
LEFT DATA VALUES
SUM = 14 (CIRCLE
)
ADDRESS 0916
ZN08
ZN07
ZN06 ZN05
L
ADDR
R
ZN04
ZN03
ZN02 ZN01
EXIT/ENTRY FOLLOWER
8
4
2
1
E
0916 BLANK (•)
8
4
2
1
ZONES
RIGHT DATA VALUES
SUM = 0 (CIRCLE
)
ENTER THIS
DATA
