NAPCO Security Systems
GEM-P1632 Installation Instructions
WI808B 8/98
Page 25
TO ARM IN 1-4 HRS. (Not for UL Installations.)
Use this function to (a) delay programmed autoarming up to 4 hours, 15 minutes or (b) initiate autoarming in 4 hours, 15
minutes as follows. Note: Autoarming may not be used in UL installations.
At the “AUTOARM IN 1-4HR” display:
For 1hr, 15min delay: press the
button, then the
button.
For 2hr, 15min delay: press the
button, then the
button.
For 3hr, 15min delay: press the
button, then the
button.
For 4hr, 15min delay: press the
button, then the
button.
Fifteen minutes prior to arming, the siren will sound a 2-second warning and the keypad will begin a 15-minute countdown
with the sounder pulsing. (The sounder may be silenced by pressing the
button, but it will come back on one
minute before arming.) Within this countdown window, arming may be delayed an additional 1 to 4 hours, as above, or
autoarming may be cancelled by arming and disarming the panel.
ACTIVATE PROGRAM
At Keypad No. 1, press YES (the
button) to activate the User Program (Program-1) Mode or Dealer Program
(Program-2) Mode, depending upon the code entered. Scroll through the programmable functions using NEXT (the
button) and PRIOR (the
button). Note: Keypad No. 1 may be located in any area.
ACTIVATE DOWNLOAD
Used on-site for remote downloading of a control-panel program from the PCD3000. Press YES (the
button) to
initiate the data transfer.
BA
SIC OPERA
T
ION
