20
GEM
-
TOUCH
K Style
Keypad Operating Guide
Your alarm specialist may have
programmed
your
system
to
be
monitored by a central station. The con-
trol panel has a built
-
in communicator
that can transmit emergency signals and
status reports to the central station 24
hours a day.
Communicator Features
Abort Delay.
Ask your installer which
of your zones have Abort Delay, a
delay that enables you to reset the
system before it communicates to the
central station. Your system has a
SIA CP
-
01 required Abort Delay of 30
seconds (it may be removed or in-
creased up to 45 seconds, at your
option, by consulting with your install-
er).
Regular Burglary
(Non
-
24
-
Hour)
Zone reports are aborted by
disarming within the delay period.
24
-
Hour
Zones
and
zones
programmed to report restores must
be restored first, then the control pan-
el armed and disarmed, all within the
delay period.
Opening and/or Closing Reporting.
Your system can notify the central station
every time it is disarmed or armed. Any
or all of up to 96 different users can each
be identified. If your system reports on
arming (Closing Report), the central
station will acknowledge arming. This
will signal at the keypad as a "ringback"
beep.
Note:
If the ringback signal is not
heard, call for service.
C E N T R AL S T AT I O N M O NI T OR I N G
EMERGENCY SERVICES
NOTIFIED UPON ALARM CONDITION
EMERGENCY
SERVICE
DISPATCH
(MONITORS
YOUR SYSTEM
24 HOURS A
DAY)
PROTECTED PREMISES
PROTECTED PREMISES
COMMUNICATOR
COMMUNICATOR
CENTRAL STATION
