6.3 Fans in the mounti ng bracket behind the HDD cage
If you want to mount additi onal fans inside the case, for example to opti mise disk venti lati on,
you can use the specially developed mounti ng bracket that is screwed to the hard drive cage.
For this, fi rst remove the screws and then take the bracket out.
The bracket off ers mounti ng holes both for 120 and 140 mm fans; install the fans, then att ach
the bracket with the four screws back to the HDD-cage, as can be seen in the picture.
If you install case fans in the mounti ng bracket, those should support the movement of air
from front to back.
6.4 Fans in the side panel (not available on the window side panel)
If you want to accommodate
fans in the side panel, remove
the outer cover by loosening
the screws on the inside.
The dust fi lters can remain in
its positi on. Please place the
fans on the inside of the side
panel above the dust fi lter
and screw them in from the
outside.
120 mm
/
140 mm
14
Summary of Contents for Deep Silence 6 Revision B
Page 1: ......
