Guide d’Installation sonde E4000
E4000 probe Installation Guide
www.nano-sense.com
All Rights Reserved
Tel: 33 (0)1 41 41 00 02
page 25/27
3. Ventilation Control
The different measurements are used to control the ventilation based on applications.
The table below summarizes which sensor to use for each application:
Control
Application
CO2 NDIR
Single band
CO2 NDIR
Double band
VOC
Humidity
Temperature
Particles
Office
Individual
NA
NA
Open space
NA
NA
Meeting room
Small
NA
NA
large
NA
NA
Amphitheatre
NA
NA
Restaurants
Main room
NA
NA
Kitchen
Public buildings
Swimming pool /
Hospitals
*
**
NA
Theatres
NA
NA
Other
NA
NA
Housing /Hotels
Bath rooms
NA
Bed rooms
NA
NA
Living rooms
NA
NA
Industrials
premises
Shops
NA
NA
Parking, Garages
NA**
NA
***
NA**
NA**
NA**
NA**
Especially recommended
Satisfactory
NA
Not Adapted
*
The environment is too aggressive for CO2 solid state gas sensors because of recurring chlorine
vapors. Use NDIR optional sensor
**
With regular change of sensor
***
Use of CO sensors and specific Low Speed, High Speed management.
NanoSense offers specific solutions for car parks.
Note that a humidity outdoor sensor and/or a temperature outdoor sensor can be coupled with E4000-
NG’s humidity and temperature sensors to optimize ventilation.
Example:
If indoor air is too humid (risk of developing mites) and outdoor air is drier, an air renewal will lower
the inside humidity. On the contrary, if the outside air is more humid than indoor air, we can only play
on the temperature.
A Particles sensor, a Radon sensor and an Ozone sensor (under development) can be handled by the
E4000-NG
probe with specific associated control.
