Guide d’Installation sonde E4000
E4000 probe Installation Guide
www.nano-sense.com
All Rights Reserved
Tel: 33 (0)1 41 41 00 02
page 20/27
V O C
> R E L
To choose another mode press OK (Middle button)
The display shows the possible modes:
A B S
> R E L
Select the mode by moving the indicator with the right or left key then press OK (Middle button).
Select "
SAVE
" and press OK (Middle button) to save the setting.
> S A V E
C A N C E L
Press OK (Middle button) and the following confirmation message is then displayed.
12. Connection diagram according to position of micro
switches
S A V E D
To ventilation control box
Connection with negative
logic (NC) for one speed
ventilation.
The micro-switch “1&2”
in NC position.
Connection with positive
logic (NO) for one speed
ventilation.
The micro-switch “1&2”
NO position.
Connection with positive
or negative logic for two
speeds ventilation.
The micro-switch “1&2”
in the position proper to
the logic of ventilation
