manualshive.com logo in svg

Nanometrics RM-4, User Manual

Share
Download
Nanometrics RM-4 User Manual Download Page 50

where SEV is the single letter (I, W, E, or F) indicating the severity of the message and NNN is the
serial number of the RM-4 that generated the log message.

Log Messages

Information

BufferedConsumer

A BufferedConsumer is running

A  BufferedConsumer  process is receiving packets from a  PacketReader
process. The PacketReader is the process which reads the packets from the
serial port. A PacketReader is assigned to each serial port. The message is a
notification that the  BufferedConsumer has been started and packets
received  from the serial ports are forwarded to the  central  acquisition
process via the Ethernet port.

HrdMsgProc

Starting TelemetryPacketReader 

[port number]

The telemetryPacketReader at the serial port specified by the port number in
the message has been started.

Port80

You are not allowed to log in.

The user name and the password received by the RM-4 from the RM-4 user
interface did not match any of the user name and password pairs configured
in the RM-4. Reset the  logon window, type in the correct user name and
password and try to login again.

RequestSubmitConfig

Updated config from remote request.

The RM-4 configuration was updated with the new configuration received
from the RM-4 user interface.

File successfully uploaded.

The RM-4 successfully received and accepted the file sent by the RM-4 user
interface.

RM4

Nanometrics RM4 version

 [version number],

 ROM

 [ROM ID].

Informational message about  the operating software on the RM-4. The
message is generated startup, and indicates the version number  of the
software and the ROM ID (A or B) from which the code is loaded.  Operators
should always search for this message while performing the daily system
operation procedures since this message  indicates that the RM-4 is
restarted.

Using defaults saved in flash memory.

The RM-4 is using the configuration from the flash memory. Note that the
configuration is  written to the flash memory when a  “Commit  Config”
command is issued by the RM-4 user interface.

RM-4 Manual     44

Appendix D - Instrument Log Messages

Summary of Contents for RM-4





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands