Nanometrics RM-4, User Manual

Page: 29 / 60

Figure 9: GPS activity if the RM-4 is equipped with internal GPS
View system log
Click the “Request Log” button to request the most recent system log messages. The content of
the log is displayed in a pop-up text window.
SOH updates
Click the “Request SOH” button to request the most recent state-of-health information for the
system. The results of the request are displayed in the pages grouped under “Operation”.
Update RM-4 system configuration
Click the “Configuration” tab to bring to the front the system configuration pages (see Figure 10).
The ability of a client to change a particular part of the configuration depends on his/her access
level (either “factory”, “tech”, or “user”).
System Hardware
The “System Hardware” page contains the configurable items of the RM-4 system and hardware.
System
RM-4 serial number The serial number of the RM-4. Factory access.
Config. port baud rate Baud rate (bytes/sec) used in configuring RM-4. Select one of
the values in the given list. Default value is 9600. Tech access.
SOH report interval The time interval (in seconds) at which the RM-4 reports its
SOH status to NAQS. Value ranges from 0 to 99999. Tech
access.
RM-4 Manual 23
5 - User Interface