10
Zetasinter System
®
Heating program setting
①
From stop state, Press
to go to the setup program state.
②
The set points of the step StEPXX are displayed (C XX temperature in °C, and t XX time in min).
③
Press
,
and
to modify the value.
④
Press
to move to the next parameter. The program parameters are displayed in the following order:
setpoint1, time1, setpoint2, time2.
-
Press and hold
to return to the previous setting. The program step can be changed at any time,
even if the program is running.
⑤
Set t××= -121 to indicate the end of the program (automatic switch-off).