Nanni QLS 65T, User Manual

Page: 73 / 80

73
REPAIRS
An alternator is a very sophisticated piece of equipment.
In case of fault, there is no serviceable part inside the unit
for the end user. Should any defect be found in the above
tables, consult a seasoned certified marine electrician
who will contact the nearest Nanni representative for
action to undertake.
S09 ALTERNATOR
ALTERNATOR STORAGE
As the alternator is fitted onto the engine, follow storage
genset recommendations.
DISPOSAL AND RECYCLING INSTRUCTIONS
These instructions are for information purposes only.
It is the user’s responsibility to comply with local
regulations regarding product disposal and recycling.
Recyclable materials
Alternators are mainly constructed from iron, steel and
copper materials, which can be reclaimed for recycling
purposes.
Waste & hazardous materials
The following components and materials require special
treatment and must be separated from the alternator
before the recycling process:
- Electronic materials found in the terminal box,
including the automatic voltage regulator (198), current
transformers (176), interference suppression module
(199) and other semi-conductors.
- Diode bridge (343) and surge suppressor (347), found
on the alternator rotor.
- Major plastic components, such as the terminal box
structure on some products.
These components are usually marked with information
concerning the type of plastic. All materials listed
above need special treatment to separate waste from
reclaimable materials and should be entrusted to
specialist recycling companies.
The oil and grease from the lubrication system is
labelled as a hazardous waste and must be treated in
accordance with local regulations.