66
TO REPLACE THE BELT:
1. Stop the engine and remove the key from the panel.
2. Carefully remove beltguard cover from engine.
3. Release tension on belt on tension arm and remove
poly-vee belt from pulleys.
4. Install the new belt. Check that the belt seats nicely
between the flanges of all the pulleys.
5. Apply tension to belt with tensioner. Remove socket.
CHECK THE BELT TENSION:
On picture shown at bottom of previous page, depress
the belt at point indicated by the red arrow and check for
a deflection between 7 and 9 mm. If required, loose the
head screw as indicated below and adjust belt tension.
MISCELLANEOUS
CAMSHAFT TIMING
From the two camshafts down to the crankshaft,
N5.150 engine timing is ordered through a gear system.
The complete assembly is service free. Inspection is
occuring only during a major service on the engine
S08
MAINTENANCE
Summary of Contents for QLS 65T
