Nanni QLS 65T, User Manual

Page: 30 / 80

30
INSTRUMENTS
STARTING BUTTONS
The red push square knob on the left allows to start and
to stop the genset engine and to preheat the glow plugs.
The instantaneous black square knob on the right al-
lows to energize the starter motor.
ENGINE OIL PRESSURE
Oil pressure is a measure of the force pushing the lubri-
cant through the oil pump, showing that the lubrication
process is occurring correctly. If indicator is above the
maximum or below the minimum level, an engine check-
ing must be performed.
ENGINE COOLANT TEMPERATURE
The instrument provides an indication of the engine
coolant temperature. Any abnormal value must be
investigated promptly.
ALARMS
The genset operating condition is monitored through
a set of sensors which relevant alarms or status are
located in one indicator located at the center of the
panel. Alarms are lighting up when activated by an event.
DISPLAYS
Plugs preheat :
When plugs preheat is activated trough the ON button,
the preheat signal is illuminated.
Coolant temperature :
The signal is turning on when engine coolant temperature
is reaching maximum safe temperature. The coolant
temperature dial must be watched closely and relevant
fault must be found quickly Ie. compartment abnormal
temperature, coolant leak, engine fault, severe genset
overload etc.
S05 ENGINE INSTRUMENTS PANEL