Nanni Q1100 Series, User Manual

Page: 83 / 98

83
S08 ALTERNATOR
STARTING AND STOPPING OPERATIONS
All the instrumentation for starting, running and stopping
the system is provided by NANNI.
CAUTION!
Starting, running and stopping operations must be carried
out by qualified personnel who have read and understood
the safety instructions at the beginning of the chapter.
IMPORTANT!
When the system is put into operation for the first time,
which should be done at reduced speed, the operator
should check that no abnormal noise can be detected.
If an abnormal noise is detected, stop the system
immediately and improve the mechanical coupling.
CLEANING AND LUBRICATION
Before approaching or touching the alternator, make sure
it is de-energized and at room temperature; at this point,
it can be cleaned externally using compressed air.
CAUTION!
Never use liquids or water.
Do not clean the inside of the electrical components with
compressed air, as this may cause short circuits or other
anomalies.
For bearing lubrication, see the table later in this section.