78
S08
MAINTENANCE
FITTING THE HEAT
EXCHANGER
1. Fit the heat exchanger by holding the bracket for the
exhaust manifold, moving it slightly to the side and fit
-
ting it:
2. Fit all screws by hand and then tighten them. Tighten-
ing torque 50 Nm (37 lb/ft):
3. Lubricate and fit the coolant pipe from the heat ex
-
changer. Angle the pipe from the thermostat housing
inwards and push it onto the connection:
4. Fit the coolant pipe with the thermostat housing
cover:
5. Fit the sea water pipe between the charge air cooler
and heat exchanger.
6. If the engine has a water-cooled exhaust pipe bend:
Fit the sea water pipe between the heat exchanger and
the exhaust pipe bend:
Summary of Contents for N16.1000 CR3
