Nanni N16.1000 CR3, Operator'S Manual

Page: 30 / 119

30
S04 ENGINE WARRANTY
ENGINE HOMOLOGATION
The engine type can be exhaust emission certified. It
means that Nanni guarantees that all engines of the
same type that are manufactured are approved and
certified by the authorities in accordance with different
exhaust emissions standards.
However, for the engine to be in accordance with this
standards, special requirements for maintenance and
service are to be followed :
• Only Nanni replacement parts must be used.
• Maintenance intervals must be observed.
• The engine must not be modified in any way except
with accessories and service kits approved by Nanni
Industries S.A.S. France.
• Service of the fuel system must always be carried out
by an authorized Nanni workshop.
• No modifications to the air intake and exhaust system
may be undertaken.
• Seals may only be broken by authorized personnel.
• The operation instructions stated in the relevant
manuals should be follow by the user.
Nanni’s responsibility for the engine specification being
in accordance with the certification will be invalidate if
one or several of this conditions are not followed.
ENGINE RESPONSABILITY
Nanni designs its engines to have minimum
environmental impact. This objective, however, can only
be achieved with your full cooperation.
Our operating and maintenance instructions are to help
you to protect your engine and adopt environmentally
responsible behaviour.
Ensure you only use the fuels and oils recommended.
Using another type of fuel or oil could cause major
malfunctions, an higher fuel consumption, a reduced
engine service life, and a greater discharge of exhaust
gases.
When draining the oil and changing the oil or fuel
filter, dispose of the waste in an appropriate container.
These fluids cause major damage to flora and fauna
if discharged into nature. Use an absorption kit in the
event of accidental discharge of oil or fuel into the water.
WARRANTY
This manual is supplemented by a Warranty Information
Booklet. We recommend that you read this publication
thoroughly.
Pay special attention to the applicable duty cycle and
to the resulting limitations. Failure to comply with the
warranty conditions will void the Warranty.
The validity of the Warranty is also dependent on proper
installation and maintenance operation being carried
out by an authorized Nanni representative.
NOTE !
Late or improper maintenance or use of spare parts
other than Nanni original spare parts will invalidate
Nanni’s responsibility for the engine accordance with
homologation and will void the Warranty.
Modifications to the engine’s settings, as well as any
other technical modification (accessories, spare parts,
additional equipment, etc) ARE FORBIDDEN WITHOUT
WRITTEN AUTHORIZATION FROM NANNI INDUSTRIES
S.A.S.
Any modification will void the Warranty. Damage caused
by failure to follow operation instructions or incorrect
operation is also not covered by the warranty.