10
②
DMX Terminator
ln DMX control mode, the DMX output of the last fixture should be connected with a DMX terminator
(not included). The terminator is connected with a 120Ω(OHM) resistor across Pin 2 and Pin 3 (as shown below).
This prevents interference caused by DMX signals in the transmitting process.
DMX Terminator Connection
Connect a 120Ω(OHM) resistor
across Pin 2 and Pin 3 in an XLR
plug and insert into the DMX OUT
socket on the last unit.
PIN 2
PIN 3
120Ω
1
2
3
5
4
Please scan the QR code to check or download the latest DMX reference guide.
③
Channel Setting
④
Refer to the DMX reference guide and control the fixture via DMX/RDM console. (For detailed operation, please
refer to the DMX/RDM console operation manual.)
Note: DMX reference guide
《
PavoTube_II_15C_30C_DMX_REFERENCE_GUIDE_EN
》
is downloadable from
www.nanlite.com or from the QR code as below.
3. RDM Romote Control
①
Connect the light fixture to the console with RDM function with a connection cable.
