TOT
1. Open the PC software programming to select the times . The purpose of the
Time-out Timer is to prevent any single person from using a channel for an extended period of time.
2. The overtime can be set by PC software programming ( the time can set as 30 seconds, 60
seconds, 90 seconds
、
120 seconds
、
150 seconds
、
180 seconds or OFF ). If the continuous
launching time is over the preset timer, the launching will be stopped and a “Beep” tone sounds.
To stop the “Bi” tone, please release the PTT button. You can press the PTT button again to
resume launching.
Oral Channel Indicator Function
Open the PC software to select the language. When the oral channel indicator
function is programmed to be off, then the transceiver will not report the channel. When the oral
channel indicator function is programmed to be in English or in Chinese, then the transceiver will
report the channel accordingly.
Scan Function
1. Open the PC software to select the scan should be turned on or not.
2. There’re scan function options behind each channel if the function is selected. When the scan
function is set to be ON, the channel can be scanned automatically in standby state, and you can
talk on this channel while there’s signal. Rotate the channel selector to channel 16 to activate the
16
Summary of Contents for NF-910
Page 22: ...Appendix CTCSS and DCS chart 21...
Page 23: ......
