Nanfone NF-910, User Manual

Page: 14 / 24

Channel Lock Out
Radio with channel lock out function avoids not transmitting by some improper operation on the
radio at some specific occasions.
Steps: Press Keys SK1(FM/Monitor/FM +) and Key SK2(FM-) at the same time to turn the radio on ,
and “beep” tips sound . It means changing present status.
It is only allowed to use one channel and can not be changed by Channel Selector when active
Channel lock out function .
Do again the above steps to turn to Channel 16.
Low Battery Alert
1. Working in Voltage higher 6.5 V
2. Transmit and receive working ,but red indicator flashes when voltage lower than 6.3V ,but
higher than 5.8V (Battery shows 1 Grid) alarm every 20 seconds.
3. Voltage lower than 5.8V, receive working , alarm every 2 0 seconds ,but can not transmitting.
Wired Cloning (Mutual clone between two transceivers)
1. Well connected the transmission lines to the both transceivers, and then power on the
subsidiary transceiver.
2. Rotate the channel selector on the base transceiver to channel 8, then hold and Press Keys SK1
“Radio/Monitor/FM+” key to power on, (3 seconds later) until the orange light (red light and green
light flash simultaneously) flashes which indicates the base transceiver is in cloning state, then
13