Nanfone NF-910, User Manual

Page: 15 / 24

release the button.
3. When the orange light on the base transceiver flashes, press the PTT key, the green light on
base transceiver flashes, and the red light on subsidiary transceiver flashes, which indicates the
base transceiver is in cloning state. The mutual clone is successful when the light on base
transceiver flashes orange again.
4. If indicator lights of both two transceivers flashes abnormally in the process of data transmit,
it means replication fail. In that case, please check and make sure the transmission line is well
connected. And please press the PTT button again to resume cloning when the indicator light of
the base transceiver shines orange.
5. If need to clone with more than one transceiver, please turn off the subsidiary device after
cloning finished and then pull out the transmission cable. And then clone to next transceiver
following steps by press PTT again.
6. Please reboot the transceiver to make it work properly after cloning.
14