51
8B. SERVICES – To be conducted by a technician only –
Test mode
Troubleshooting
Assembly and disassembly of the machine
(2) Replacing the monitor glass
WARNING
To prevent electric shock, accident or injury and to prevent damage to the electrical
z
z
circuitry of the machine, be sure to turn the power switch off before performing the
tasks described below.
CAUTION
The monitor glass should be removed by two or more people in a large work area to
z
z
prevent accidents.
Remove the Top Board assembly. (See P. 49 “8B-4-1 (1) Removing and attaching
the Top Board assembly.”)
z
The following disassembly work requires sufficient space below
the Top Board assembly. Before starting work, lay the Top Board
assembly on two stable and solid boxes, etc., as illustrated below,
and make sure that the Top Board assembly is level and stable.
Remove the four flange nuts (M4) and flat washers (M4 x Ø24) to remove the
glass retainers.
Flat washer
(M4 x Ø24)
Flange nut (M4)
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
