26
7. OPERATION
(1) SWITCH TEST
This screen is used to test the respective switch functions.
Select “SWITCH TEST” in the “I/O TEST” screen and press the Enter button. (See
P. 25 “7-4-4 Switch/sensor test (I/O TEST).”)
The Switch Test screen appears on the monitor.
SWITCH TEST
ON:RED
COIN1
0
COIN2
0
COIN3
0
SERVICE
OFF
TEST
ON
SELECT (UP/DOWN)
OFF/OFF
ENTER
OFF
UP SELECT SW + ENTER : EXIT
(c)
(d)
(e)
(f)
(g)
(h)
(i)
1 P
o o
o + o
o
(a)
(b)
2 P
o o
o + o
o
3 P
o o
o + o
o
4 P
o o
o + o
o
Switch Test screen
Item
Description
(a) Check indicator for the illuminated
switch on the 1P Control Panel
assembly
While the illuminated switch is pressed and held, the indicator lights in
red. (Indicators for 2P thru 4P function as well.)
(b) Check indicators for the joystick on
the 1P Control Panel assembly
While the joystick is tilted and held in a certain direction, the indicator
corresponding to that direction lights in red. (Indicators for 2P thru 4P
function as well.)
(c) COIN 1
Each time a coin switch on coin unit 1 is activated, the value increases
by increments of one. When the value exceeds 255, the value is reset
to zero. Note that the coin counter synchronizes to this test option.
(d) COIN 2
Each time a coin switch on coin unit 2 is activated, the value increases
by increments of one. When the value exceeds 255, the value is reset
to zero. Note that the coin counter synchronizes to this test option.
(e) COIN 3
Each time a coin switch on coin unit 3 is activated, the value increases
by increments of one. When the value exceeds 255, the value is reset
to zero. Note that the coin counter synchronizes to this test option.
(f) SERVICE
While the Service button is pressed and held, the value is “ON.” (Note
that the credit value does not increase during test mode.)
(g) TEST
While the Test switch is set to “ON”, the value is “ON.” (Note that the
value is “ON” during test mode.)
(h) SELECT (UP/DOWN)
While the Select switch is tilted and held up, the value is “ON/OFF.”
While down, the value is “OFF/ON.”
(i) ENTER
While the Enter button is pressed and held, the value is “ON.”
Operate the switches listed in the screen and confirm the result.
To return to the I/O Test screen, hold the Select switch in the raised position and
press the Enter button.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
