27
7. OPERATION
Test mode
Troubleshooting
Test mode
(2) OUTPUT TEST
This screen is used to test the illuminated switches.
Select “OUTPUT TEST” in the “I/O TEST” screen and press the Enter button. (See
P. 25 “7-4-4 Switch/sensor test (I/O TEST).”)
The Output Test screen appears on the monitor.
OUTPUT TEST
ON:RED
LAMP1
OFF
LAMP2
OFF
LAMP3
OFF
LAMP4
OFF
EXIT
SELECT SW:CHOOSE
ENTER SW:ENTER
(a)
(b)
(c)
(d)
Output Test screen
Item
Description
(a) LAMP1
When this item is set to “ON,” the 1P Start button lights.
(b) LAMP2
When this item is set to “ON,” the 2P Start button lights.
(c) LAMP3
When this item is set to “ON,” the 3P Start button lights.
(d) LAMP4
When this item is set to “ON,” the 4P Start button lights.
Flip the Select switch up or down to select an item. The selected item will blink.
Press the Enter button to enter the selection.
Flip the Select switch to turn on the illuminated switch corresponding to the
selected item.
Before selecting the next item, press the Enter button. Repeat steps 2 thru 5 until
all the switches have been checked.
To return to the I/O Test screen, select “EXIT” and press the Enter button.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
