1. SAFETY PRECAUTIONS
2
1-3 Critical safety precautions
WARNING
Should any abnormality occur, turn off the power switch immediately to stop
z
z
operating the machine. Then, unplug the power cord plug from the AC outlet.
Operating the machine without correcting abnormalities can result in a fire or
accident.
Some monitor sections remain hot or charged with high voltage even after the power
z
z
switch is turned off. Do not touch the monitor unnecessarily in order to avoid electric
shock and burns.
Dust accumulated on the power cord plug may cause a fire. Check the power cord
z
z
plug regularly and remove dust.
Insert the power cord plug firmly into the AC outlet. Poor contact may cause
z
z
overheating that can lead to a fire or burns.
A damaged power cord can cause a fire, electric shock or electrical leakage. Observe
z
z
the following cautions.
Keep the power cord away from heating devices.
•
Do not twist the power cord.
•
Do not bend the power cord forcibly.
•
Do not alter the power cord.
•
Do not bundle the power cord.
•
Do not pull the power cord. (Always unplug by holding the power cord plug, and
•
avoid pulling the power cord.)
Do not place anything on the power cord.
•
Do not allow the power cord to be caught under or between the machine, other
•
equipment or the wall.
Do not do anything else that might damage the power cord.
•
Do not wet the power cord or power cord plug with water. Water can cause an electric
z
z
shock or electrical leakage.
Do not touch the power cord plug with a wet hand. Doing so can result in an electric
z
z
shock.
The machine’s rated power supply voltage and maximum consumption current are
z
z
120 V AC, 2 A, respectively. To prevent fire and electric shock, be sure to use interior
wiring that conforms to these power supply specifications.
Operate the machine with a power supply voltage in the range of 104 to 127 V AC.
z
z
Operating the machine with a supply voltage outside the specified range may cause
a fire or electric shock. To ensure that the machine operates in optimum condition,
maintain the power supply at 120 V AC.
To ensure safe operation of the machine, be sure to conduct the pre-service check
z
z
(See P. 15 “7-1 Pre-service check”) and service (See P. 44 “8B. SERVICES”) described
in this manual. Failure to conduct the pre-service check or service can result in an
accident.
Use consumables and service parts (including fasteners) specified by our company.
z
z
To order parts, contact your distributor.
Do not convert the machine without permission. Do not perform any work that is not
z
z
described in this operation manual. Unauthorized conversion of the machine may
create unforeseen hazards.
When transferring ownership of the machine, be sure to provide this operation
z
z
manual with the game machine.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200