background image

5-3 

Test Mode

The self-test function is activated by using the test switch, which also displays the

Game Option Screen where the game pricing is changed. Additionally, there are

 (5) test mode screens where various tests for each control are performed.

1. Self-test

Open the coin door and move the test switch to the “ON” position. The

“Game Option” Screen is displayed on the monitor.

2. Test Mode

Pressing the credit switch while the Game Option Screen is displayed, causes

the various Test Screens 1 through   (Switch Test Screen, Gun Initialize

Screen, Cross Hatch Pattern (2) and Color Bar Test Screen) to appear. Refer

to Section 

 Test Screens, for information regarding each screen. At the

end of testing, turn the test switch “OFF”, and the display will return to the

Attract Mode.

3. Changing the game settings (Game Option Screen)

Turning the Test Switch “ON” displays the Game Option Screen, allowing

game pricing and other settings to be changed.

GAME 

OPTIONS

COIN 1 MECH 1

COUNT

COIN

COIN 

MECH 2

COUNT

1 COIN

GAME COST 

2 C O l N  

1

CREDIT

GAME COST 2

2 COIN 1

CREDIT

CONTINUE COST

2 COIN 1 CREDIT

DISCOUNT CONTINUE NO

BONUS COIN

NONE

FREE PLAY

NO

RANK

B

ATTRACT SOUND

ON

SOUND TEST 1

1

Illustration 5-2, 

 OPTION 

Summary of Contents for LUCKY & WILD


























Reviews: