19
(3)
Removing the hopper
z
z
z
z
z
To protect the service staff and other people from an electrical shock, accident and
injury, and to prevent damage to the electrical circuitry of the machine, always turn
off the power switch before initiating the described task.
To clean the hopper or conduct maintenance, remove the hopper by following the procedure described
below.
a. Remove the back door from the game machine cabinet.
b. Remove the one screw located at the upper section of the hopper rail.
c. Unplug the hopper motor connector, and remove the two wing bolts that are holding the main unit.
d. Remove the hopper by pulling it carefully toward the back, making sure that it does not contact
other parts.
e. To reinstall the hopper, follow the removal sequence in reverse.
* Special parts are installed to the upper section of the hopper rail.
When replacing the hopper, be sure to install the special parts by referring to the page showing the
internal parts in the back section of the cabinet in “10. Names and Details of Parts.”
WARNING