4
2) Adjusting the Tilt switch
z
z
z
z
z
To protect the service staff and other people from an electrical shock, accident and
injury, and to prevent damage to the electrical circuitry of the machine, always turn
off the power switch before initiating the described task.
1
Open the front door.
2
Loosen the Phillips pan head screw (M3 x 6) on the weight.
3
Move the weight up or down to adjust the sensitivity. To reduce the sensitivity, raise the weight. To
increase the sensitivity, lower the weight. After the sensitivity has been adjusted, secure the
weight in position by tightening the screw.
4
Adjust the washer position so that the weight is located at the center of the hole of the washer.
WARNING
If the weight is not at the center of the round hole, the machine is not level. Adjust the machine so that it
is perfectly level. (See “INSTALLATION 1) Adjusting the level adjusters.”)
Weight
Phillips pan head screw
(M3 x 6)
Weight
Front door
Decreases the sensitivity.
(Adjustment range)
Increases the sensitivity.
Washer
Tilt switch