20
(4)Adjusting the side covers
z
z
z
z
z
To protect the service staff and other people from an electrical shock, accident and
injury, and to prevent damage to the electrical circuitry of the machine, always turn
off the power switch before initiating the described task.
i
If the pusher generates abnormal noise or stops operating, the problem may be solved by adjusting
the positions of the side covers. To adjust the side cover positions, follow the procedure described
below.
Preparation for the adjustment
i
With the pusher fully extended toward the front, turn off the power switch.
i
Remove coins from the pusher.
i
Dismount the spiral unit.
WARNING
Adjustment procedure
a. Loosen the screws (3 screws on each side) that are holding the side covers.
b. Provide a gap of 0.5 mm to 1 mm between the pusher sheet metal and each cover, and tighten the
screws.
c. Turn on the power switch and check the operation.
Gap measuring 0.5 mm
to 1 mm in width
Side cover
Side cover