13
3) Adjusting the front edge
To adjust the front edge, follow the procedure described below.
1
Remove the front glass plate.
2
A Loose the two screws that are holding the front edge (see the photo below).
* Only loosen the screws. If the screws are removed, they can accidentally fall into the hopper.
3
Adjust the vertical positioning of the front edge.
i
Raising the front edge decreases the field payout rate.
i
Lowering the front edge increases the field payout rate.
4
Tighten the two screws on the front edge.
Decreases the payout rate.
Increases the payout rate.