Therefore, ionized alkaline water should be used as fresher as possible, or at least it should be used
within 12 hours from its production.
You can find ionized alkaline water in the shops. But this water do not have negative ORP, which
describes water as natural antioxidant.
7.1.
Remove the appliance cover (9) by holding the bottom
container with one hand and pushing the handle up with
the other hand.
7.2.
According to one’s needs insert the removable containers
(3; 4) into the selected part of the bottom container (1).
The ionized alkaline water is always produced at the
cathode (light electrode), and the ionized acidic water is
always produced at the anode (dark electrode).
7.3.
Pour cold water from a tap: at first into the removable
containers (3; 4) and then - into the bottom container (1)
up to the bottom mark (5).
7.4.
Put the cover (9) on the bottom container (1) so that the
required electrode would enter into the removable
containers (3; 4) according to one’s needs. The cover and
container handles should make a complete handle.
7.5.
Insert the corded plug (10) into the mains socket. Press the button (14). The LCD display (19) will
show the message ‘Water ionizer’. After 4 seconds the message ‘Ionization process’ should appear
with the question: ‘Is the dark electrode placed into the inner container?’ below. If the dark
electrode has been placed into the inner container, select ‘Yes’ by pressing the button (17)
. Then
the appliance will let you choose from pH values between 8.0 pH and 9.2 pH. If the light electrode
has been placed into the inner container, select ‘No’ by pressing the button (18)
. Then the
appliance will let you choose from pH values between 9.0 pH and 11.4 pH. If you select the wrong
regime, you will not be able to produce alkaline or acidic water of the required pH.
7.6.
Once you have selected the required pH value, press the START button (16). The red LED
indicator (21) lights up. The appliance starts running. The required time is determined by the
appliance itself: after it has finished the appliance will switch off automatically with an audible
signal. The red light LED indicator (21) goes out.
Note. An audible signal is given after the appliance running time has passed
.
7.7.
Pull the plug with a cord (14) from the mains socket, take off the cover (10). Put the appliance
electrodes on the plate (13), pour out the ionized water from the removable containers (3; 4) and
then from the bottom container into tightly closed containers.
7.8.
Freshly made alkaline water is turbid and sometimes foamy (depending on the running time of the
appliance). After pouring out the alkaline water into the container, sediments and foam precipitate
on the bottom, the water becomes clear and suitable for consumption.
7.9.
Freshly made acidic water has a slight acid and chlorine smell and a sour taste (depending on the
running time of the appliance).
7.10.
Water may be heated up to 40 degrees during the running of the appliance.
7.11.
Wash the removable containers (3; 4) and the container (1) with water.
DO NOT use water to wash the cover (9).
www.nalite.com
7.
PRODUCTION OF IONIZED WATER (MODIFICATIONS SILVER AND CLASSIC)
