Fig. 1 General View of Appliance
1. Bottom container
2. Handle
3.4. Removable container with partition
5. Mark of the bottom water level
6. Mark of the top water level
7.8. Electrodes for ionized water production (flat)
9. Cover
10. Cable of cover connection
11. Contact for connection of a silver electrode (mod.
Silver)
12. Holder with a round silver electrode (mod. Silver)
13. Plate
5.1
The appliance consists of a bottom container (1), removable containers (3; 4), a cover (9) and a plate
(13). (See Fig. 1.)
5.2
The bottom container (1) is the ionization container. It has a side-mounted handle (2). Two round
removable containers (3; 4) separated by membrane are fitted in the container (1). There are two
marks on the inside of the container (1): the lower (5) indicates the minimum and upper (6) – the
maximum water level.
5.3
The cover (9) is equipped with flat electrodes (7; 8) and a round contact (11, modification Silver).
These flat electrodes are used for the production of ionized water (modification Silver and Classic)
and the round contact is for the connection of silver electrode (modification Silver). The cable (10) is
mounted in the handle (9).
5.4
The cover (9) contains the appliance control scheme (see figure 2), controlled using buttons (14, 15,
16, 17, 18 and 19). Button (14) – on/off. Button (15) – stop the process. Button (16) – start the
process. Buttons (17) and (18) – adjust parameters.
www.nalite.com
5.
APPLIANCE DESIGN AND OPERATING PRINCIPLE
