451-93281-001
SHOUT sp User Guide, Rev B.1
47
Minutes of Calm to End Motion
This setting specifies the duration of calm needed in order for the device to
return to the motionless state.
Motion Sensor Reporting
This setting determines whether to send a report when motion starts and/or
when motion ends. If the Report on Motion Start option is enabled, a version 6
report with Short Code 20 will be transmitted when motion is detected. If the
Report on Motion Stop option is enabled, a version 6 report with Short Code 21
will be transmitted when motion ends.
Figure 78: Motion
Figure 79: Motion Detect
Figure 80: Motion Sensor
Reporting
Remote Update Time Check
This enables a time check for incoming remote updates. When enabled, remote
updates with a timestamp less than or equal to the last remote update time are not
applied.
Successful Send Required
This option restricts the SHOUT sp from changing to a lower priority tracking mode
based on whether or not a tracking report has been transmitted. The tracking mode
priority is Emergency first, followed by Normal. When set to Disabled. Tracking
mode will switch immediately, a change to the tracking mode takes effect
immediately (i.e. Emergency to Normal). When set to Must attempt one report
before switching, the mode change will be delayed until at least one tracking cycle