451-93281-001
SHOUT sp User Guide, Rev B.1
10
IMPORTANT: The SHOUT sp must be kept in environments between 0
o
C (32
o
F)
and 45
o
C (113
o
F) when charging.
The SHOUT sp can be turned on by pressing the Power Button on the side of the
chassis (see Figure 1) for approximately 2 to 3 seconds. The initialization process
is as follows: the LED will rapidly blink for 20 seconds and stop blinking for the next
10 seconds. The NAL splash screen will display signifying a successful boot,
afterwards you will be presented with the Android home screen. Swipe up on the
screen to access the device features. The device display can be configured to
automatically sleep from 15 seconds to 30 minutes of inactivity through Android
Settings –> Display -> Sleep.
The SHOUT sp can be awakened by pressing the Power Button for approximately 1
second.
The SHOUT sp can be completely turned off, with no tracking or text messaging at
any time, by pressing the Power Button for approximately 2 seconds and pressing
the Power Off button that displays on the screen.
If needed, the SHOUT sp can be rebooted by pressing the Power Button for
approximately 10 seconds.
The SHOUT sp has a capacitive touchscreen. Capacitive touchscreens are not
affected by dust or grease. These screens have high resolution and high response
speed. It detects touches by fingers only. It does not detect input by a gloved hand.
The Back Arrow button at the bottom of the display can be pressed at any time to
return to the previous screen. Icons can be moved to appear anywhere on the
screen by pressing, holding and dragging them to their new destination. The new
destinations can be either a new home screen page or the Favorite Bar at the
bottom of the screen.
Figure 3: Back Arrow Button
B
ASIC
N
AVIGATION
T
OUCHSCREEN
P
OWER
O
N
/
O
FF
&
A
WAKEN
,
R
EBOOT