44
nal von minden GmbH · Manual
Reacti f Touch
User Logout
is enabled and
Operator Setup
will be enabled aft er Administrator informa-
ti on had been set. The
Operator Setup
process is similar to
User Lockout Disabled
.
Timed Logout
Select
Timed Logout
in the
Lockout screen
and press the
Drop-Down Arrow
to turn the
setti ng ON or
OFF
. F
or the initi al use, the Timed Logout functi on is OFF
.
•
Timed Logout - OFF
For the initi al use, the Timed Logout functi on is OFF
. In this setti ng, the analyzer will
remain powered on all the ti me, even if the screen has not been touched for a long
ti me. The user who is currently logged in will remain logged in. If a new user wants
to operate the analyzer, they will need to manually log the previous operator out and
login with their own name and password.
•
Timed Logout - ON
Select
ON
and set the
waiti ng ti me
(select from between 1 minute to 100 hours). This
turns on the analyzer’s power saving mode. In this setti ng, if the screen is not touched
during the waiti ng ti me, the Test Table Insert will be drawn back into the analyzer, the
screen will darken, and the user account will logout. When a user wakes the analyzer
Summary of Contents for Reactif Touch
