nal von minden Reactif Touch, Manual, Page: 60 / 88

56
nal von minden GmbH · Manual
Reacti f Touch
Press to run a Level 2 test if you set the control number to 2 or 3. (For further
instructi ons on how to set QC test levels, refer to Secti on 7 Analyzer Setup: Lockout: QC
Lockout ). The test steps are the same as those for Level 1.
When both QC Tests pass, the “ E ” at the end of the test number will not be shown and
the test mode will change back to Routi ne .
If you set the control number to 3, the Level 3 test will be run, in which the steps are the
same as those for Level 1.