9602-LP User Guide Version A
Document Number: 451-92750-001A
29 of 61
3.5
T
RACKING
S
ETTINGS
The
Tracking Settings
tab provides multiple settings:
Emergency Report Flood, Remote
Message Format, GPS Always ON, Start-Up Mode, Data Log Tracking, Block Invalid Reports,
and Test Report Flood.
Emergency Report Flood
sets how many GPS reports are sent out continuously
when first entering Emergency Tracking. After <n> GPS reports have been sent, the
preprogrammed reporting interval takes effect.
Remote Message Format
sets format of the messages that will be sent to the
command center.
GPS Always ON
forces the GPS receiver to stay on in between reports, allowing hot-
start each time the 9602-LP wakes up.
Start-Up Mode
sets the power-up mode of the 9602-LP.
The 9602-LP allows GPS reports to be saved on its nonvolatile memory with the
Data Log Tracking
option turned on. When its memory is full, the oldest reports are
overwritten. SatTerm can be used to retrieve all position reports at a later time
through the multi-interface serial port.
When
Block Invalid Reports
is enabled and a tracking mode is selected, reports with
invalid GPS fix are not sent.
Test Report Flood
sets how many GPS reports are sent out continuously when first
entering Test Tracking. After <n> GPS reports have been sent, the preprogrammed
reporting interval takes effect.
